Quantcast
Channel: Automotive Repair Manual Download and Reviews » Search Results » cost of repairing or replacing the abs system in 2014
Viewing all articles
Browse latest Browse all 10

Ford Focus ABS Relay Removal and Installation Instructions

0
0

The ABS relay is built-in into the control module on the Ford Focus which in flip is integrated into the Hydraulic Control Unit. To put in a brand new unit within the Ford Focus requires a reasonable amount of skill. The area should be saved clear of contamination and care must be taken when working with the ABS in the Focus. The Hydraulic Control Unit should be factory standard.

Ford Focus ABS Relay Removal Instructions

1. Turn the ignition to OFF. Disconnect the negative cable on the battery and the connector for the low brake fluid indicator light earlier than elevating the vehicle and utilizing jack stands to safe the wheels.
2. Remove the reservoir filler cap and front wheels. Loosen the bleeder screw and drain the brake fluid reserve.
3. Lower the automobile and put the brake fluid reservoir cap again on before eradicating the air cleaner and outlet tube.
4. Take off the battery junction box and set transfer it out of the way to be able to disconnect the electrical connector on the ABS module.
5. Disconnect the brake tubes on the hydraulic control unit and unclip the tubes. Be sure you plug the tubes with a view to stop contamination. Take away the tubes from the HCU to the master cylinder.
6. Unhook the wiring harness and take away the bolts from the assist bracket on the HCU and raise out the meeting as a whole.

Ford Focus ABS Relay Installation Instructions

1. Reinstall the HCU into the bracket and join the wiring harness.
2. Unplug the brake tubes and reconnect the Grasp Cylinder to the HCU. Tighten the nuts to 13 foot kilos of torque.
3. Reconnect the brake tubes to the clip assembly and fix the brakes tubes to the HCU. Tighten the nuts to ninety seven inch pounds of torque.
4. Hook up the ABS electrical connector. Slip the connector in slowly to ensure it’s seated properly.
5. Reconnect the battery junction field and electrical connector. Tighten the bolts earlier than placing the air cleaner and outlet tubes in place.
6. Bleed the brakes system. Use only permitted brake fluid to avoid damaging the Ford Focus.


Viewing all articles
Browse latest Browse all 10

Latest Images

Trending Articles





Latest Images